A Review on the Separation of Niobium and Tantalum by Solvent Extraction

Niobium and tantalum are found together in natural minerals. Leaching with concentrated acid solution or alkaline roasting followed by water/dilute acid leaching results in a solution containing these two metals. In this work, we reviewed the extraction and separation of Nb(V) and Ta(V) from leach liquors in the absence and presence of hydrofluoric acid by acidic, neutral extractants and amines. Several solvent extraction systems were compared in the light of the requirement of hazardous chemicals, extraction/separation efficiency, and stability/solubility of extractants. Since the cationic species of Nb(V) and Ta(V) are unstable in the aqueous solution, the application of acidic extractants for extraction and separation of these metals is limited. Amines can extract Nb(V) as well as Ta(V) irrespective of the presence of fluoride ion but the separation of these metals from the loaded amines should be carried out in stripping process, resulting in process complexity. Another disadvantage encountered for amine is related to high viscosity in extraction process. Neutral extractants are considered as promising extractants which are effective to separate Ta(V) and Nb(V) from either non-fluoride or to moderate fluoride ion concentration in terms of extraction, separation and stripping efficiency. Compared to the traditional methyl iso-butyl ketone (MIBK) based system, methyl isoamyl ketone (MIAK) is found to be a promising extractant to separate Nb(V) and Ta(V).     

Experiences with implementing parallel discrete-event simulation on GPU

The Journal of Supercomputing - Modern graphics processing units (GPUs) offer much more computational power than recent CPUs by providing a vast number of simple, data-parallel, multithreaded...     

Stream-Based Data Sampling Mechanism for Process Object

Process object is the instance of process. Vertexes and edges are in the graph of process object. There are different types of the object itself and the associations between object. For the large-scale data, there are many changes reflected. Recently, how to find appropriate real-time data for process object becomes a hot research topic. Data sampling is a kind of finding c hanges o f p rocess o bjects. There i s r equirements f or s ampling to be adaptive to underlying distribution of data stream. In this paper, we have proposed a adaptive data sampling mechanism to find a ppropriate d ata t o m odeling. F irst o f all, we use concept drift to make the partition of the life cycle of process object. Then, entity community detection is proposed to find changes. Finally, we propose stream-based real-time optimization of data sampling. Contributions of this paper are concept drift, community detection, and stream-based real-time computing. Experiments show the effectiveness and feasibility of our proposed adaptive data sampling mechanism for process object.     

Multiphase topology optimization with a single variable using the phase-field design method

In this study, a multimaterial topology optimization method using a single variable is proposed by combining the solid isotropic material with penalization method and the reaction-diffusion equation. Unlike ordinary multimaterial optimization, which requires several variables depending on the number of material types, this method intends to represent various materials as one variable. The proposed method combines two special functions in the sensitivity analysis of the objective function to converge the design variable into prespecified density values defined for each of the multimaterials. The composition constraint based on a normal distribution function is also introduced to estimate the distribution of each target density value in a single variable. It enables density exchange between multiple materials by increasing or decreasing the amount of a specific material. The proposed method is applied to structural and electromagnetic problems to verify its effectiveness, and its usefulness is also confirmed from the viewpoint of cost and computation time.     

Design of switchable band‐notched frequency selective absorber

An active band‐notched frequency selective absorber (BNFSA) with switchable notch band is proposed in this article. The BNFSA is a two‐layer structure composed of a lossy layer at the top and a ground plane at the bottom, separated by an air spacer. The element of the lossy layer is a lumped‐resistor‐loaded metallic dipole with a parallel LC resonance structure, which is realized by complementary n‐shaped resonator (CnR) inserted in the center, and PIN diode is welded at two arms of CnR. The bias circuit printed on the back of the substrate of the lossy layer connects to anode and cathode of the diode by via hole and isolates by the inductor. Simulation results show that the notch bands are located at 4.50 and 6.81 GHz when the diode sets to ON and OFF, respectively. To validate the performance of switchable BNFSA, the prototypes are fabricated and measured, reasonable agreement between simulated and measured results is obtained.     

微量Zr对不对称轧制Al-0.8Mg-0.9Si合金板织构及性能的影响

本文研究了微量Zr对不对称轧制Al-0.8Mg-0.9Si合金板及其相继固溶处理后的微观结构及性能的影响。结果表明：微量Zr在Al-0.8Mg-0.9Si合金中形成Al3Zr相弥散分布在基体中,在不对称轧制过程中,该化合物相对Copper{112}<111>、Brass{011}<211>、S{123}<634>、E{111}<110>和F{111}<112>等形变织构无明显影响；在随后的固溶处理过程中,轧制板材发生的再结晶使得Copper、Brass、S等形变织构的取向密度降低,但不溶的细小Al3Zr相在一定程度上抑制了不连续再结晶行为,反而使轧制过程中形成的E、F剪切织构的取向密度增加。添加微量Zr所形成的上述结构使该合金板材在固溶后获得较好的综合性能,其抗拉强度、屈强比和延伸率分别可达230MPa、0.49和9.5%以上；塑性应变比r值从0.7提高至0.84,杯突值IE由8.94提高至9.84,各向异性度|Δr|由0.15降低至0.04。     

Study on Flow Behavior and Heat Exchange Characteristics of a Capillary Tube-Suction Line Heat Exchanger

The present research is to develop a homogenous mathematical model to simulate capillary tube-suction line heat exchanger (CT-SL HX) based on the fundamentals of conservations of mass, momentum and energy with comprehensive experimental result validations. The computer model is fully validated by 72 experimental data with error bands of ±15%, ±2°C and ±35% on the mass flow rate prediction, the suction pipe outlet temperature, and the heat exchange estimation respectively. The results suggest that the internal diameter of the capillary tube, and the heat-transfer length of the CT-SL HX have demonstrated an apparent impact on the capillary tube outlet conditions and heat transfer across the segment.     

Super-Resolution Reconstruction of Images Based on Microarray Camera

In the field of images and imaging, super-resolution (SR) reconstruction of images is a technique that converts one or more low-resolution (LR) images into a highresolution (HR) image. The classical two types of SR methods are mainly based on applying a single image or multiple images captured by a single camera. Microarray camera has the characteristics of small size, multi views, and the possibility of applying to portable devices. It has become a research hotspot in image processing. In this paper, we propose a SR reconstruction of images based on a microarray camera for sharpening and registration processing of array images. The array images are interpolated to obtain a HR image initially followed by a convolution neural network (CNN) procedure for enhancement. The convolution layers of our convolution neural network are 3×3 or 1×1 layers, of which the 1×1 layers are used to improve the network performance particularly. A bottleneck structure is applied to reduce the parameter numbers of the nonlinear mapping and to improve the nonlinear capability of the whole network. Finally, we use a 3×3 deconvolution layer to significantly reduce the number of parameters compared to the deconvolution layer of FSRCNN-s. The experiments show that the proposed method can not only ameliorate effectively the texture quality of the target image based on the array images information, but also further enhance the quality of the initial high resolution image by the improved CNN.     

基于分支定界法的相控阵雷达事件调度算法

为解决相控阵雷达事件调度问题中调度成功率、时间偏移率与算法时效性三者之间的矛盾，本文提出一种基于分支定界法的调度算法；该算法首先在现有调度结果上调取所有可执行事件，即获得若干"节点"，多步递推后由多"层"节点形成若干条备选"分支"，扩大解空间范围，提高算法性能；然后通过"删减"操作删减掉收益较低分支，将解空间控制在一适当范围内，减小搜索盲目性，降低算法计算量.仿真实验表明，与基于综合优先级算法的调度结果相比，利用本文算法调度时调度成功率提升了52%；与基于时间指针算法的调度结果相比，本身算法时间偏移率降低了61%；与基于遗传算法的调度结果相比，本文算法调度耗时仅为前者1~2%.